Interarch is a renowned name in the field of manufacturing the most advanced roofing systems, ranging from typical screw-down roofing panels to high-end standing seam roofing systems. It is the only company of its kind in India that can produce all its roofing systems in limitless lengths with site roll-forming capabilities for all its panels. The company offers various roofing products depending on customer need and application.
TRACDEK® metal roofing systems from Interarch come in profiles that range from pierced fixed to standing seam and clip down roof systems. It can be used as single skin roof or wall cladding or can be used in combination with advanced multi-layered insulated systems to give optimal thermal and acoustic characteristics. Moreover, it can also be combined with other cladding systems on the inside to form a sandwich panel system.
This coated insulated metal roofing systems are used for industrial and commercial buildings with durable and watertight cladding systems in flush and profiled finishes with complementary range of accessories suitable for the most stringent environments.
Tracdek© Hi-Rib
The side lap is totally weatherproof. Any moisture drawn in by capillary action is trapped and dispersed by normal run-off.
Long lengths and weatherproof side lap allow TRACDEK® Hi-Rib® to be used safely on roof pitches as low as 3 degree (approximately 1 in 20) in single-sheet lengths, 5 degree (approximately 1 in 11) with end laps, and for vertical cladding.
Application
TRACDEK® Hi-Rib® roof and wall systems are ideally suited for regions which receive heavy rainfall and can be used on slopes as low as 1 in 20.TRACDEK® Hi-Rib panels can be used as internal liners for double-skin roof and wall construction, with or without insulation. TRACDEK® Hi-Rib curved panels are also offered for special architectural requirements.TRACDEK®Klippon®
The clip-on side lap makes the Klippon® profile completely water-tight. The side lap is totally weatherproof. Any moisture drawn in by capillary action is trapped and dispersed by normal run-off. Long lengths and weatherproof side lap allow the Klippon® profile to be used safely on roof pitches as low as 2 degree (approximately 1 in 30) for single length sheets, 3 degree (approximately 1 in 20) with end laps.
Application
TRACDEK®Klippon® can be used for roofing large span factories, warehouses, commercial, educational, institutional, domestic, and recreational buildings.TRACDEK® SS-2000®
TRACDEK® SS-2000®, also known as TRACDEK® Vertical Leg Structural Standing Seam Roof System, blends the aesthetics of an architectural panel with the strength of a structural panel. These panels have good uplift ratings assuring the reliability of the roof and can go down to roof slopes of up to 1:50. The designer is thus afforded a flexible tool to meet any design challenge.Application
The system is designed to be installed over open framing. 15 mm plywood or a composite roof assembly may be used as alternate sub-structures.Benefits
Long Life: TRACDEK® is manufactured in a high quality Galvalume® steel, galvanized steel and aluminum with optional high performance organic coatings for long life, even in coastal areas.High strength: TRACDEK® profiles provide excellent spanning ability and remarkable recovery after excessive load.
Economical: The long spanning ability and more coverage per unit mass permits wide support spacing, enabling supporting structure economies.
